Hard Disk Drive Printed Circuit Boards
PCB: BIOS transfer + checkup of your old PCB
€25.00
VAT included
For each PCB replacement, the BIOS/ROM data from the original PCB must be transferred.
Two prices are available depending on where the replacement PCB comes from:
- PCB purchased from this shop: preferential rate of €25.
- PCB purchased elsewhere / supplied by the customer: €49, as the service includes receipt, identification of both PCBs, the technical work and return preparation.
The transfer is performed by flashing and/or soldering depending on the model.
Important: BIOS/ROM transfer does not guarantee data recovery if the fault is not caused by the PCB.
Important — customized service and no guarantee of result: this service concerns work on the hard drive PCB and/or BIOS/ROM chip. It is performed with a duty of care, but without any guarantee that the hard drive will spin up, be detected by a computer, or that data will be accessible or recoverable.
If the initial fault is actually PCB-related, the intervention may allow temporary access to the drive in order to copy the data to a healthy device. However, if the fault comes from the heads, motor, preamplifier, platters, internal firmware or another internal defect, the drive may remain inaccessible even if the PCB/BIOS work is correctly performed.
BIOS/ROM transfer, chip programming or PCB adaptation is a customized service performed at the customer's request. Once the intervention has started or has been completed, the customized service part cannot be cancelled under the right of withdrawal.
Product customisation
Don't forget to save your customization to be able to add to cart
pucebioschgtrenvoipcb
Data sheet
You might also like
For each PCB replacement, the BIOS/ROM data from the original PCB must be transferred.
Two prices are available depending on where the replacement PCB comes from:
- PCB purchased from this shop: preferential rate of €25.
- PCB purchased elsewhere / supplied by the customer: €49, as the service includes receipt, identification of both PCBs, the technical work and return preparation.
The transfer is performed by flashing and/or soldering depending on the model.
Important: BIOS/ROM transfer does not guarantee data recovery if the fault is not caused by the PCB.
Important — customized service and no guarantee of result: this service concerns work on the hard drive PCB and/or BIOS/ROM chip. It is performed with a duty of care, but without any guarantee that the hard drive will spin up, be detected by a computer, or that data will be accessible or recoverable.
If the initial fault is actually PCB-related, the intervention may allow temporary access to the drive in order to copy the data to a healthy device. However, if the fault comes from the heads, motor, preamplifier, platters, internal firmware or another internal defect, the drive may remain inaccessible even if the PCB/BIOS work is correctly performed.
BIOS/ROM transfer, chip programming or PCB adaptation is a customized service performed at the customer's request. Once the intervention has started or has been completed, the customized service part cannot be cancelled under the right of withdrawal.