Carte PCB Seagate 100827800 REV A recto avec puce BIOS
  • Carte PCB Seagate 100827800 REV A recto avec puce BIOS
  • Carte PCB Seagate 100827800 REV A verso référence PCB

FAQ:

Modals REV A, REV B, REV C, REV D, REV E, REV P1, REV P2, 00, 01, 02 are they all compatible with each other?
Yes! They are different board modals, but they are compatible! We will ship you a  randomly selected model. Please leave a message if you wish to receive a specific modal, thank you!
Additional information (Main Controller IC, PCB Label) doesn't match, does it matter ?
No ! Theses details are here for reference, but the same PCB models can have different components, what matters is PCB number
Is this PCB compatible with my HDD ?
We cannot list all HDD models compatible with all PCBs. To find the matching HDD PCB you can unscrew your HDD and find the correct "PCB number". In general a Hard Disk PCB is compatible a whole family of hard drives with different capacities : 20G, 30G, 40G, 60G, 80G, 120G, 160G, 200G, 250G, 300G, 320G, 400G, 500G, 750G, 1TB, 1.5TB, 2TB, 3TB, 4TB.

100827800 REV A PCB board for Seagate hard drive

100827800 REV A PCB board for Seagate hard drive. Please check that the number printed on your board matches exactly before ordering.

Quantity

Before buying :

  1. These are just PCBs (Printed Circuit Boards), not the whole HDDs (Hard Disk Drives);
  2. The aim of a PCB swap is data recovery, or hard disk repair,
  3. The buyer is responsible for finding the right PCB for their Hard Drive,
  4. You will benefit from a 14-day return period,
  5. In most cases, you should transfer the BIOS before you swap hard drive PCB, in order to make the replacement board compatible with your HDD. See services below.Transfer possible by Flashing and/or Soldering.
  6. Hard drive failures are not always caused by PCB failure. We cannot guarantee your drive will be repaired by replacing the hard drive PCB.

100827800 REV A PCB board for Seagate hard drive

This product page is for a replacement electronic PCB board for a Seagate hard drive. The PCB number to check is 100827800 REV A.

  • Brand: Seagate
  • Category: Seagate hard drive PCB board
  • PCB reference: 100827800 REV A
  • Observed compatible revisions: REV A, REV B, REV C, REV D, REV E, REV F, REV G according to competitor benchmark; always check the number printed on your board before ordering.

Check before replacement

A hard drive PCB board must be replaced with an identical reference. Depending on the drive, transferring the BIOS/ROM chip from the original PCB to the replacement board may be required to recover the data.

Seagate
100827800 REV A

Data sheet

PCB Number
100827800 REV A
With ROM Chip
Yes
flashable
BIOS transfer required
Yes

You might also like