Carte PCB Toshiba G0020A GA0020A pour disque dur 3,5 pouces SATA
  • Carte PCB Toshiba G0020A GA0020A pour disque dur 3,5 pouces SATA
  • Détail référence PCB Toshiba G0020A GA0020A

FAQ:

Modals REV A, REV B, REV C, REV D, REV E, REV P1, REV P2, 00, 01, 02 are they all compatible with each other?
Yes! They are different board modals, but they are compatible! We will ship you a  randomly selected model. Please leave a message if you wish to receive a specific modal, thank you!
Additional information (Main Controller IC, PCB Label) doesn't match, does it matter ?
No ! Theses details are here for reference, but the same PCB models can have different components, what matters is PCB number
Is this PCB compatible with my HDD ?
We cannot list all HDD models compatible with all PCBs. To find the matching HDD PCB you can unscrew your HDD and find the correct "PCB number". In general a Hard Disk PCB is compatible a whole family of hard drives with different capacities : 20G, 30G, 40G, 60G, 80G, 120G, 160G, 200G, 250G, 300G, 320G, 400G, 500G, 750G, 1TB, 1.5TB, 2TB, 3TB, 4TB.

G0020A PCB board for Toshiba hard drive

€89.90
VAT included

G0020A PCB board for Toshiba hard drive. Please check that the number printed on your board matches exactly before ordering.

Quantity
In Stock

Before buying :

  1. These are just PCBs (Printed Circuit Boards), not the whole HDDs (Hard Disk Drives);
  2. The aim of a PCB swap is data recovery, or hard disk repair,
  3. The buyer is responsible for finding the right PCB for their Hard Drive,
  4. You will benefit from a 14-day return period,
  5. In most cases, you should transfer the BIOS before you swap hard drive PCB, in order to make the replacement board compatible with your HDD. See services below.Transfer possible by Flashing and/or Soldering.
  6. Hard drive failures are not always caused by PCB failure. We cannot guarantee your drive will be repaired by replacing the hard drive PCB.

G0020A PCB board for Toshiba hard drive

This product page is for a replacement electronic PCB board for a hard drive. The PCB number to check is G0020A.

  • Brand: Toshiba
  • Category: PCB hard drive Toshiba
  • PCB reference: G0020A
  • Identified compatibility: 3.5 SATA

Check before replacement

A hard drive PCB board must be replaced with an identical reference. Depending on the drive, transferring the BIOS/ROM chip from the original PCB to the replacement board may be required to recover the data.

Toshiba
G0020A

Data sheet

PCB Number
G0020A
With ROM Chip
Yes
flashable
No, verified on PCB
BIOS transfer required
Yes

You might also like